Efficient three dimensional modelling of additive manufactured textiles
AbstractPurpose– The purpose of this paper is to investigate, develop and validate a three-dimensional modelling strategy for the efficient generation of conformal textile data suitable for additive...
View ArticleRegulating complex geometries using layered depth-normal images for rapid...
AbstractPurpose– Most layer-based rapid prototyping systems use polygonal models as input. In addition, the input polygonal models need to be manifold and water-tight; otherwise the built objects may...
View Article3D roughness profile model in fused deposition modelling
AbstractPurpose– The paper aims to predict the surface roughness of fused deposition modelling prototypes. Since average roughness is not comprehensive, this study aims to extend the characterization...
View ArticleNovel polymeric support materials for jetting based additive manufacturing...
AbstractPurpose– Jetting-based additive manufacturing processes are gaining attention due to their high speed of operation, accuracy and resolution. Support material plays an important role in the...
View ArticlePrototype production and experimental analysis for circular and profiled...
AbstractPurpose– The purpose of this paper is to present a technique of fabricating profiled conformal cooling channels (PCCC) in an aluminium filled epoxy mould using rapid prototyping (RP) and rapid...
View ArticleInvestigation of Plasma Spectra During Laser Micro Sintering Cu-based Metal...
AbstractPurpose - This paper investigated the plasma characteristics of laser micro sintering Cu-based metal powder using spectra method.Design/methodology/approach - Temporal and time integrating...
View ArticleProduction of Customized Hip Stem Prostheses – A comparison between...
AbstractPurpose - The purpose of this paper is to study the use of the Additive Manufacturing (AM) method, Electron Beam Melting (EBM), for manufacturing of customized hip stems. The aim is to...
View ArticleAdditive manufacturing (AM) and Nanotechnology: Promises and Challenges
AbstractPurpose - This paper provides a review of available published literature in which nanostructures are incorporated into AM printing media as an attempt to improve the properties of the final...
View ArticleDESIGN OF AN FDM POSITIONING SYSTEM AND APPLICATION OF AN ERROR-COST...
AbstractPurpose - As a result of the increased number of applications for additive manufacturing technologies and in addition to the demand for parts produced with high accuracy and better quality, the...
View ArticleOptimization of thick layers photopolymerization systems applying...
AbstractPurpose - Over the last several years, the range of applications of photopolymerization process has been steadily increasing especially in areas such rapid prototyping, UV inks, UV coats and...
View ArticleAPPLICATION OF RAPID TOOLING FOR THE PRODUCTION OF MOULDS SUITABLE FOR...
AbstractPurpose - The purpose of this paper is to demonstrate the applicability of an indi- rect rapid tooling technique to the autoclave forming of carbon fibre reinforced plastic...
View ArticleFabrication of HA/ß-TCP scaffolds based on micro-syringe extrusion system
AbstractPurpose - The purpose of this paper is to introduce a novel and concise technique of fabricating HA/ß-TCP composite ceramic scaffolds for bone tissue engineering via extrusion deposition...
View ArticleManufacturing of Patient-Specific Optically Accessible Airway Models by Fused...
AbstractPurpose - The purpose of this paper is to use rapid prototyping technology, in this case Fused Deposition Modeling (FDM) to manufacture 2D and 3D Particle Image Velocimetry (PIV) compatible...
View ArticleEditorial for RPJ 19.5
AbstractPurpose - n/aDesign/methodology/approach - n/aFindings - n/aResearch limitations/implications - n/aPractical implications - n/aOriginality/value - n/a
View ArticleInvestigation of plasma spectra during selective laser micro sintering...
AbstractPurpose– This paper aimed to investigate the plasma characteristics of selective laser micro sintering Cu-based metal powder using spectra method. Design/methodology/approach– Temporal and time...
View ArticleProduction of customized hip stem prostheses – a comparison between...
AbstractPurpose– The purpose of this paper is to study the use of the additive manufacturing (AM) method, electron beam melting (EBM), for manufacturing of customized hip stems. The aim is to...
View ArticleAdditive manufacturing (AM) and nanotechnology: promises and challenges
AbstractPurpose– This paper aims to provide a review of available published literature in which nanostructures are incorporated into AM printing media as an attempt to improve the properties of the...
View ArticleDesign of an FDM positioning system and application of an error-cost...
AbstractPurpose– As a result of the increased number of applications for additive manufacturing technologies and in addition to the demand for parts produced with high accuracy and better quality, the...
View ArticleOptimization of thick layers photopolymerization systems applying...
AbstractPurpose– Over the last several years, the range of applications of photopolymerization process has been steadily increasing, especially in areas such as rapid prototyping, UV inks, UV coats and...
View Article
